COSMO® HD-100.400

THE ELASTIC SPECIALIST

Elastic 1-Part MS Adhesive for Bonding and Sealing

COSMO® HD-100.400 is a one-component, moisture-curing MS adhesive based on a silane-terminated polymer. It is designed for elastic bonding and sealing applications in construction and industry, including suitable aluminium assemblies where surface preparation and bonding suitability have been verified.

The solvent-free formulation provides high-strength, elastic adhesive joints with an elongation at break of approximately 350%. It compensates for different material expansions and combines low shrinkage with good outdoor weather resistance and UV stability. The adhesive does not foam during curing and offers good adhesion to different substrates after appropriate surface preparation.

COSMO® HD-100.400 is compatible with natural stone and mirror rear sides according to DIN EN 1036. Its surface can be smoothed easily, and after complete curing, the adhesive can be overcoated with many paint systems. Subsequent powder coating is possible after reaching final strength under the specified conditions.

APPLICATION EXAMPLES

• Elastic bonding and sealing of suitable aluminium assemblies

• Bonding and sealing in automotive and vehicle body manufacturing

• General assembly bonding in construction and industry

• Installation of skirting boards, laminate and cable ducts

• Bonding of mirrors in accordance with the applicable technical regulations of the glazing trade

• Stair construction and general building applications

• Bonding of façade cassettes and sandwich elements

• Glass bonding in furniture and display cabinet construction

• Bonding applications in solar systems and wind power plants

• Fixing signs

• Apparatus and plant construction

• Various industrial bonding and sealing applications

SPECIAL CHARACTERISTICS

• Elastic adhesive joint

• Very low emission

• Solvent-free

• Compatible with mirror rear sides according to DIN EN 1036

• Compatible with natural stone

• Does not foam during curing

• Low shrinkage

• Good adhesion to different surfaces after appropriate surface preparation

• Easy surface smoothing

• High strength of adhesive joints

• Compensates for different material expansions

• Good outdoor weather resistance

• Good UV stability

• Can be overcoated with many paint systems after complete curing

• Suitable for subsequent powder coating (20 minutes at up to +180 °C) after reaching final strength

CERTIFICATES & TEST REPORTS

CE Marking

Classified as F-EXT-INT-CC 20 HM according to EN 15651-1.

Classified as PW-EXT-INT-CC 20 HM according to EN 15651-4.

Fire classification: Class E according to EN 13501-1.

Declaration of Performance (DoP) No.: WCTHD0001-01

ISEGA, Aschaffenburg

Suitable for use in food-related environments, for example for jointing and bonding wall and floor areas in food preparation and processing facilities.

Declaration of No Objection No.: 67217 U 26

ILAK, Wettenberg

Salt spray test according to DIN EN ISO 9227.

Test Report No.: 9-5-18/2

GEV EMICODE EC1 PLUS

Classified as EMICODE EC1 PLUS (very low emission) in accordance with the criteria of GEV.

Licence No.: 5020

Sentinel Holding Institut (SHI)

Sustainability-tested product in accordance with common building certification standards.

SHI Product Pass No.: 2165-10-1000

French VOC Emission Classification

French VOC-Emission class A+